Rockwell Disclaimer: The product is used surplus. Radwell is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Radwell is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Radwell makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Radwell also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Radwell also makes no representations as to your right to install any such firmware on the product. Radwell will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Filter Results
SHIMPO DRIVES
VRKF-9C-400
DISCONTINUED BY MANUFACTURER, PLANETARY GEAR REDUCER, FLANGE MOUNT, 1:9 GEAR RATIO, SOLID OUTPUT SHAFT, COAXIAL, 15 ARC MINUTES OF BACKLASH, SINGLE STEP
✓ IN STOCK!
Buy Surplus As Low As
$329.10
Repair Yours
$319.48
ASCO
ASCO NUMATICS
F1AR-24A1E-CAA0
PNEUMATIC CYLINDER, A SERIES, FRONT FLANGE, 4 INCH BORE, 24 INCH STROKE, ROD CODE 1, 1/2 INCH PORTS, NO MAGNETF1AR-24A1E-CAA0
✓ IN STOCK!
Repair Yours
$300.00
ALLEN BRADLEY
845T-DN52ECN
DISCONTINUED BY MANUFACTURER, ENCODER, SQUARE FLANGE, 3/8IN W/FLAT, 24V DC IN, 5V DC DLD OUT, CHANNEL A AND B, 10 PIN CONNECTOR, 1000 PPR, WITHOUT MATING CONNECTOR
✓ IN STOCK!
Buy Surplus As Low As
$285.71
Repair Yours
$300.00
THK
BTK1605-2.6ZZ-635L
DISCONTINUED BY MANUFACTURER, BALL NUT FLANGE, BTK1605A, W/SCREW, SHAFT 25IN APROX.
✓ IN STOCK!
Buy Surplus As Low As
$318.56
EATON CORPORATION
CUTLER HAMMER
C361NC
DISCONNECT SWITCH, FLANGE MOUNTED, 30 AMP RATING, 4 INCH HANDLE, NO FUSING, 7.5 HP AT 208/240-VAC, 15 HP AT 480VAC, 20 HP AT 600VAC, 5 HP AT 250VDC, NO HANDLE
✓ IN STOCK!
Repair Yours
$300.00
SWAGELOK
SS-V3NBF8-FL
STAINLESS STEEL 3-VALVE INSTRUMENT MANIFOLD, 1/2 IN. FEMALE NPT X FLANGE (MSS), BALL TIP
✓ IN STOCK!
Buy Surplus As Low As
$256.66
LANTECH
P-404232
DISCONTINUED BY MANUFACTURER, BUSHING FLANGE, 12MM ID X 18MM
✓ IN STOCK!
Buy Surplus As Low As
$3.11
PARKER
SCHRADER BELLOWS
1.50H4MA2U18A18.00
PNEUMATIC CYLINDER, 1.50 INCH BORE, CAP RECTANGULAR FLANGE, 4MA SERIES, LIPSEALS, NPTF, INTERMEDIATE MALE PISTON ROD THREAD STYLE, 18 INCH STROKE
✓ IN STOCK!
Buy Surplus As Low As
$110.02
Repair Yours
$300.00
EG&G
EG&G TORQUE SYSTEMS
MT-3306-005GJ
SERVO MOTOR, CUSTOM DESIGNED, SQUARE FLANGE
✓ IN STOCK!
Repair Yours
Contact Us
NIDEC CORP
CONTROL TECHNIQUES
DXE-450B
DISCONTINUED BY MANUFACTURER, DX SERVO MOTOR, CLASS F, 230VAC, 3 PHASE, ENGLISH MOUNTING FLANGE, 16 IN-LBS CONTINUOUS TORQUE, 3000 RPM
✓ IN STOCK!
Buy Surplus As Low As
$1,574.64
Repair Yours
$1,452.17
NIDEC CORP
CONTROL TECHNIQUES
DXE-450
DISCONTINUED BY MANUFACTURER, DX SERVO MOTOR, 230VAC, 3 FRAME, ENGLISH MOUNTING FLANGE, 16 IN-LBS CONT. TORQUE, 4000 RPM MAX SPEED
✓ IN STOCK!
Buy Surplus As Low As
$1,359.78
Repair Yours
$1,188.02
CONTROL CONCEPTS
DAZIC
CI2130B
DISCONTINUED BY MANUFACTURER, SPEED SWITCH, ELECTROMECHANICAL ROTARY MOTION CONTROL SWITCH, 1/2 INCH SHAFT, 4-2000 RPM, CAST IRON HOUSE, FLANGE BASE, SPDT, 10 AMPS, 125 / 250 / 480 VAC, 1/2 ...
✓ IN STOCK!
Buy Surplus As Low As
$531.52
SMC
CEP1F20-100
SCALE CYLINDER, SERIES CEP1, HIGH PRECISION, NON-ROTATING, FRONT FLANGE TYPE MOUNT, 20 MM BORE, 100 MM STROKE, WITH CONNECTOR, 0.5 M CABLE LENGTH, WITHOUT AUTO SWITCH
✓ IN STOCK!
Repair Yours
$693.05
NIDEC CORP
CONTROL TECHNIQUES
NTE-207-LONS-0000
SERVO MOTOR, NT SERIES, 230 VAC, 50/60 HZ, ENGLISH FLANGE, 2 IN FRAME, 7.5 LB-IN / 0.85 NM, 5000 RPM, 1.7 AMP, 0.432 KW, IP65, FLYING LEADS, UNBRAKED, 2048 PPR ENCODER, LOW INERTIA, STANDARD ...
✓ IN STOCK!
Repair Yours
$852.58
DYNAPAR
AI2503602B126
ABSOLUTE ENCODER, SERIES AI25, SIZE 25, 360 PPR GRAY EXCESS, SQUARE FLANGE, 3/8" SHAFT W SHAFT SEAL, PARALLEL GRAY, 10-30 VDC, 17 PIN AXIAL M23 CONN CW
✓ IN STOCK!
Repair Yours
$334.90
DYNAPAR
HR52501000351
INCREMENTAL ENCODER, SERIES HR25, SIZE 25, ENCLOSED, SHIELDED BEARINGS, 100 PPR, FLANGE MOUNT, 3/8" SHAFT, 10 PIN MS CONN, DIFFERENTIAL, W INDEX, FORMAT A, 5-26 VDC IN, 5 VDC DIFF LINE DRIVE ...
✓ IN STOCK!
Repair Yours
$489.00
NIDEC CORP
CONTROL TECHNIQUES
NTM-207-CONS-0000
SERVO MOTOR, NT SERIES, 230 VAC, 50/60 HZ, METRIC FLANGE, 2 IN FRAME, 7.5 LB-IN / 0.85 NM, 5000 RPM, 1.7 AMP, 0.432 KW, IP65, MS CONNECTOR, UNBRAKED, 2048 PPR ENCODER, LOW INERTIA, STANDARD ...
✓ IN STOCK!
Repair Yours
$790.00
DYNAPAR
HR62500100245
INCREMENTAL ENCODER, SERIES HR25, SIZE 25, ENCLOSED, SHAFT SEAL, 10 PPR, FLANGE MOUNT, 3/8" SHAFT, 10 PIN MS CONN, DIFFERENTIAL, NO INDEX, FORMAT A, 5-26 VDC I/O LINE DRIVER OUT (7272), 10' ...
✓ IN STOCK!
Repair Yours
$439.79
EMERSON
DXM-208CB
DISCONTINUED BY MANUFACTURER, SERVO MOTOR, BRUSHLESS, METRIC MOUNTING FLANGE, 3-PHASE, 240 VAC, 5000 RPM, 3 A, 0.47 HP, 0.35 KW,
✓ IN STOCK!
Buy Surplus As Low As
$1,196.80
Repair Yours
$1,103.72
SICK
DGS20-1F400500
(7101103); DGS20-1F400500 ENCODER; 2" INCREMENTAL ENCODER 5V IN 5V OUT SQUARE FLANGE 3/8" SHAFT QUK DISCONNECT 500PPR
✓ IN STOCK!
Buy Surplus As Low As
$154.31
Repair Yours
$300.00
SICK
STEGMANN
DRS60E4A04000
DISCONTINUED BY MANUFACTURER, INCREMENTAL ENCODER, 10V-32V, HTL FACE FLANGE, 10MM SHAFT QUICK DISCONNECT, 4000 PPR, 60 MM
✓ IN STOCK!
Buy Surplus As Low As
$154.37
Repair Yours
$300.00
SICK
DRS25-57K05000
DISCONTINUED BY MANUFACTURER, ENCODER, 8...24 VDC, SHAFT DIAMETER: 3/8", SOLID SHAFT, SERVO FLANGE, OPERATING SPEED W/ SHAFT SEAL: 6000 U/MIN, CONNECTION TYPE: CABLE / RADIAL / 1.5 M, IP65, ...
✓ IN STOCK!
Buy Surplus As Low As
$304.00
Repair Yours
$300.00
SICK
STEGMANN
DRS60E4A05000
60MM CORETECH INCREMENTAL ENCODER 10V-32V HTL FACE FLANGE 10MM SHAFT QUICK DISCONNECT 5000PPR
✓ IN STOCK!
Repair Yours
$300.00
SMC
CJ-F016B
DISCONTINUED BY MANUFACTURER, FLANGE BRACKET, METAL, MOUNT HOLES
✓ IN STOCK!
Buy Surplus As Low As
$4.47
SMC
MK2-F020
DISCONTINUED BY MANUFACTURER, FLANGE KIT, BOSS MOUNT RING, SET PIN, BOLT FOR ATTACHMENT TO CYLINDER, 20 MM BORE SIZE
✓ IN STOCK!
Buy Surplus As Low As
$6.33