SEARCH NOW FOR ALL YOUR AUTOMOTION SOLUTIONS
Radwell is here to supply you with all your plant floor needs.
Radwell is not an authorized distributor, reseller or representative of the products featured on this website. All product names, trademarks, brands and logos used on this site are the property of their respective owners. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorization by any rights holder.
Filter Results
AUTOMATION DIRECT
IRONHORSE
ACNND-45P0
IRONHORSE ACN SERIES AC GENERAL PURPOSE DRIVE, NEMA 4X, 460 VAC, 5HP WITH 3-PHASE INPUT, 2HP WITH 1-PHASE INPUT, SVC, V/HZ OR TORQUE MODE, 2 FRAME, RS-485, INTEGRATED DYNAMIC BRAKING. OPTION ...
Repair Yours
$491.00
AUTOMATION DIRECT
IRONHORSE
MTCP2-125-3BD18
IRONHORSE MTCP2 PREMIUM EFFICIENCY AC INDUCTION MOTOR, GENERAL PURPOSE, INVERTER RATED AND SEVERE DUTY, 125HP, 3-PHASE, 230/460 VAC, SUITABLE FOR 208 VAC AT 60 HZ, 1800RPM, TEFC, NEMA 444T F ...
Repair Yours
$6,357.00
AUTOMATION DIRECT
IRONHORSE
ACN-47P5
IRONHORSE ACN SERIES AC GENERAL PURPOSE DRIVE WITH DISCONNECT, NEMA 4X, 460 VAC, 7-1/2HP WITH 3-PHASE INPUT, 3HP WITH 1-PHASE INPUT, SVC, V/HZ OR TORQUE MODE, 3 FRAME, RS-485, INTEGRATED DYN ...
Repair Yours
$1,039.00
AUTOMATION DIRECT
IRONHORSE
ACN-2015
IRONHORSE ACN SERIES AC GENERAL PURPOSE DRIVE WITH DISCONNECT, NEMA 4X, 230 VAC, 15HP WITH 3-PHASE INPUT, 7-1/2HP WITH 1-PHASE INPUT, SVC, V/HZ OR TORQUE MODE, 4 FRAME, RS-485, INTEGRATED DY ...
Repair Yours
$1,170.00
AUTOMATION DIRECT
IRONHORSE
MTSP-P50-3BD18
IRONHORSE MTS PREMIUM EFFICIENCY AC INDUCTION MOTOR, WASHDOWN AND INVERTER RATED, 1/2HP, 3-PHASE, 208-230/460 VAC, 1800RPM, TEFC, NEMA 56C FRAME, 304 STAINLESS STEEL, C-FACE/RIGID BASE MOUNT ...
Repair Yours
$430.00
AUTOMATION DIRECT
IRONHORSE
ACN-42P0
IRONHORSE ACN SERIES AC GENERAL PURPOSE DRIVE WITH DISCONNECT, NEMA 4X, 460 VAC, 2HP WITH 3-PHASE INPUT, 3/4HP WITH 1-PHASE INPUT, SVC, V/HZ OR TORQUE MODE, 2 FRAME, RS-485, INTEGRATED DYNAM ...
Repair Yours
$469.00
AUTOMATION DIRECT
IRONHORSE
ACNND-4020
IRONHORSE ACN SERIES AC GENERAL PURPOSE DRIVE, NEMA 4X, 460 VAC, 20HP WITH 3-PHASE INPUT, 10HP WITH 1-PHASE INPUT, SVC, V/HZ OR TORQUE MODE, 4 FRAME, RS-485, INTEGRATED DYNAMIC BRAKING. OPTI ...
Repair Yours
$911.00
AUTOMATION DIRECT
IRONHORSE
ACN-4020
IRONHORSE ACN SERIES AC GENERAL PURPOSE DRIVE WITH DISCONNECT, NEMA 4X, 460 VAC, 20HP WITH 3-PHASE INPUT, 10HP WITH 1-PHASE INPUT, SVC, V/HZ OR TORQUE MODE, 4 FRAME, RS-485, INTEGRATED DYNAM ...
Repair Yours
$1,479.00
ELECTROCRAFT
AUTOMOTION
ALC20D1-010-1111
DISCONTINUED BY MANUFACTURER, MOTOR CONTROLLER, INPUT: 1 PHASE/ 12.4 AMP / 230 VAC (50/60 HZ), OUTPUT: 3 PHASE / 20 AMP PEAK / 320 VAC (18-20 KHZ)
Buy Surplus As Low As
$1,224.12
Repair Yours
$996.00
AUTOMATION DIRECT
IRONHORSE
MTCP2-015-3BD12
IRONHORSE MTCP2 PREMIUM EFFICIENCY AC INDUCTION MOTOR, GENERAL PURPOSE, INVERTER RATED AND SEVERE DUTY, 15HP, 3-PHASE, 230/460 VAC, SUITABLE FOR 208 VAC AT 60 HZ, 1200RPM, TEFC, NEMA 284T FR ...
Repair Yours
$1,533.00
AUTOMATION DIRECT
IRONHORSE
WG-262-040-H
IRONHORSE HEAVY-DUTY WORM GEARBOX, 40:1 RATIO, NEMA 56C INPUT, HOLLOW, 1.4375IN DIAMETER OUTPUT SHAFT, NOMINAL 1.85HP AT 1.0 SF, 1919 LB-IN MECHANICAL OUTPUT TORQUE, 2-5/8IN CENTER DISTANCE, ...
Repair Yours
$428.00
AUTOMATION DIRECT
IRONHORSE
MTPM-P50-1M18
IRONHORSE MTPM DC PERMANENT MAGNET MOTOR, SCR-PWM RATED, 1/2HP, 180 VDC, 1800RPM, TENV, NEMA 56C FRAME, ROLLED STEEL, C-FACE/REMOVABLE RIGID BASE MOUNT. REPLACEMENT BRUSHES INCLUDED.
Repair Yours
$300.00
AUTOMATION DIRECT
IRONHORSE
ACN-21P0
IRONHORSE ACN SERIES AC GENERAL PURPOSE DRIVE WITH DISCONNECT, NEMA 4X, 230 VAC, 1HP WITH 3-PHASE INPUT, 1/2HP WITH 1-PHASE INPUT, SVC, V/HZ OR TORQUE MODE, 1 FRAME, RS-485, INTEGRATED DYNAM ...
Repair Yours
$356.00
AUTOMATION DIRECT
IRONHORSE
WG-175-060-R
IRONHORSE HEAVY-DUTY WORM GEARBOX, 60:1 RATIO, NEMA 56C INPUT, RIGHT HAND, 0.875IN DIAMETER OUTPUT SHAFT, NOMINAL 0.38HP AT 1.0 SF, 469 LB-IN MECHANICAL OUTPUT TORQUE, 1-3/4IN CENTER DISTANC ...
Repair Yours
$300.00
AUTOMATION DIRECT
IRONHORSE
WG-262-005-R
IRONHORSE HEAVY-DUTY WORM GEARBOX, 5:1 RATIO, NEMA 182TC INPUT, RIGHT HAND, 1.125IN DIAMETER OUTPUT SHAFT, NOMINAL 5.24HP AT 1.0 SF, 924 LB-IN MECHANICAL OUTPUT TORQUE, 2-5/8IN CENTER DISTAN ...
Repair Yours
$300.00
AUTOMATION DIRECT
IRONHORSE
MTPM-1P5-1L18
IRONHORSE MTPM DC PERMANENT MAGNET MOTOR, SCR-PWM RATED, 1-1/2HP, 90 VDC, 1800RPM, TEFC, NEMA 56C FRAME, ROLLED STEEL, C-FACE/REMOVABLE RIGID BASE MOUNT. REPLACEMENT BRUSHES INCLUDED.
Repair Yours
$396.00
AUTOMATION DIRECT
IRONHORSE
MTPM-P33-1L18
IRONHORSE MTPM DC PERMANENT MAGNET MOTOR, SCR-PWM RATED, 1/3HP, 90 VDC, 1800RPM, TENV, NEMA 56C FRAME, ROLLED STEEL, C-FACE/REMOVABLE RIGID BASE MOUNT. REPLACEMENT BRUSHES INCLUDED.
Repair Yours
$300.00
AUTOMATION DIRECT
IRONHORSE
WG-175-010-L
IRONHORSE HEAVY-DUTY WORM GEARBOX, 10:1 RATIO, NEMA 56C INPUT, LEFT HAND, 0.875IN DIAMETER OUTPUT SHAFT, NOMINAL 1.57HP AT 1.0 SF, 515 LB-IN MECHANICAL OUTPUT TORQUE, 1-3/4IN CENTER DISTANCE ...
Repair Yours
$300.00
AUTOMATION DIRECT
IRONHORSE
WG-175-020-R
IRONHORSE HEAVY-DUTY WORM GEARBOX, 20:1 RATIO, NEMA 56C INPUT, RIGHT HAND, 0.875IN DIAMETER OUTPUT SHAFT, NOMINAL 1.02HP AT 1.0 SF, 596 LB-IN MECHANICAL OUTPUT TORQUE, 1-3/4IN CENTER DISTANC ...
Repair Yours
$300.00
AUTOMATION DIRECT
IRONHORSE
MTPM-P50-1L18
IRONHORSE MTPM DC PERMANENT MAGNET MOTOR, SCR-PWM RATED, 1/2HP, 90 VDC, 1800RPM, TENV, NEMA 56C FRAME, ROLLED STEEL, C-FACE/REMOVABLE RIGID BASE MOUNT. REPLACEMENT BRUSHES INCLUDED.
Repair Yours
$300.00
AUTOMATION DIRECT
IRONHORSE
MTPM-P75-1L18
IRONHORSE MTPM DC PERMANENT MAGNET MOTOR, SCR-PWM RATED, 3/4HP, 90 VDC, 1800RPM, TEFC, NEMA 56C FRAME, ROLLED STEEL, C-FACE/REMOVABLE RIGID BASE MOUNT. REPLACEMENT BRUSHES INCLUDED.
Repair Yours
$300.00
AUTOMATION DIRECT
IRONHORSE
GSDA-AI-A
DISCONTINUED BY MANUFACTURER, IRONHORSE GSD SERIES ANALOG INPUT MODULE, 1-CHANNEL, CURRENT, ISOLATED, INPUT CURRENT SIGNAL RANGE(S) OF 4-20 MA.
Buy Surplus As Low As
$117.00
Repair Yours
$300.00
AUTOMATION DIRECT
IRONHORSE
GSD7-120-1CR30
IRONHORSE GSD7 SERIES DC REVERSING DRIVE, 120 VAC, 1-PHASE, 1/15 TO 1/8HP AT 90 VDC, 1.2A, OPEN FRAME, PANEL MOUNT, BUILT-IN REVERSE, MAXIMUM 30 REVERSES/MINUTE, POTENTIOMETER INPUT, SCR OUT ...
Repair Yours
$300.00
AUTOMATION DIRECT
IRONHORSE
WG-175-010-D
IRONHORSE HEAVY-DUTY WORM GEARBOX, 10:1 RATIO, NEMA 56C INPUT, DUAL, 0.875IN DIAMETER OUTPUT SHAFT, NOMINAL 1.57HP AT 1.0 SF, 515 LB-IN MECHANICAL OUTPUT TORQUE, 1-3/4IN CENTER DISTANCE, CAS ...
Repair Yours
$300.00
AUTOMATION DIRECT
IRONHORSE
MTGP-P14-1L026
IRONHORSE MTGP SERIES PARALLEL SHAFT DC GEAR MOTOR, 1/7HP, 90 VDC, 26RPM, 280 LB-IN FULL LOAD TORQUE, 1.58 FLA, 69:1 RATIO, 5/8IN SHAFT DIAMETER.
Repair Yours
$300.00
AUTOMATION DIRECT
IRONHORSE
GSDA-AI-V4
DISCONTINUED BY MANUFACTURER, IRONHORSE GSD4 SERIES ANALOG INPUT MODULE, 1-CHANNEL, CURRENT/VOLTAGE, ISOLATED, INPUT CURRENT SIGNAL RANGE(S) OF 4-20 MA, INPUT VOLTAGE SIGNAL RANGE(S) OF 0-5 ...
Buy Surplus As Low As
$104.00
Repair Yours
$300.00
AUTOMATION DIRECT
IRONHORSE
GSD7-120-10CR30
IRONHORSE GSD7 SERIES DC REVERSING DRIVE, 120 VAC, 1-PHASE, 1/8 TO 1HP AT 90 VDC, 10A, OPEN FRAME, PANEL MOUNT, BUILT-IN REVERSE, MAXIMUM 30 REVERSES/MINUTE, POTENTIOMETER INPUT, SCR OUTPUT.
Repair Yours
$300.00
AUTOMATION DIRECT
IRONHORSE
MTPM-P25-1JK40
IRONHORSE MTPM DC PERMANENT MAGNET MOTOR, SCR-PWM RATED, 1/4HP, 12/24 VDC, 1732/3996RPM, TENV, SMALL FRAME, ROLLED STEEL, FLANGE MOUNT.
Repair Yours
$300.00
AUTOMATION DIRECT
IRONHORSE
MTGP-P14-1L165
IRONHORSE MTGP SERIES PARALLEL SHAFT DC GEAR MOTOR, 1/7HP, 90 VDC, 165RPM, 47 LB-IN FULL LOAD TORQUE, 1.57 FLA, 11:1 RATIO, 5/8IN SHAFT DIAMETER.
Repair Yours
$326.00
AUTOMATION DIRECT
IRONHORSE
GSD7-240-10CR30
IRONHORSE GSD7 SERIES DC REVERSING DRIVE, 240 VAC, 1-PHASE, 1/4 TO 2HP AT 180 VDC, 10A, OPEN FRAME, PANEL MOUNT, BUILT-IN REVERSE, MAXIMUM 30 REVERSES/MINUTE, POTENTIOMETER INPUT, SCR OUTPUT ...
Repair Yours
$300.00
AUTOMATION DIRECT
IRONHORSE
GSD5-240-10N4-V
IRONHORSE GSD5 SERIES DC GENERAL PURPOSE DRIVE, 120/240 VAC, 1-PHASE, 1/8 TO 1HP AT 90 VDC AND 1/4 TO 2HP AT 180 VDC, 10.8A, NEMA 4/12, WALL MOUNT, FIELD-INSTALL REVERSE, CURRENT, VOLTAGE OR ...
Repair Yours
$392.00
AUTOMATION DIRECT
IRONHORSE
GSD4-240-10N4X
IRONHORSE GSD4 SERIES DC GENERAL PURPOSE DRIVE, 120/240 VAC, 1-PHASE, 1/8 TO 1HP AT 90 VDC AND 1/4 TO 2HP AT 180 VDC, 10A, NEMA 4X, WALL MOUNT, FIELD-INSTALL REVERSE, POTENTIOMETER INPUT, SC ...
Repair Yours
$300.00
AUTOMATION DIRECT
IRONHORSE
MTPM-P13-1L19
IRONHORSE MTPM DC PERMANENT MAGNET MOTOR, SCR-PWM RATED, 1/8HP, 90 VDC, 1917RPM, TENV, SMALL FRAME, ROLLED STEEL, FLANGE MOUNT.
Repair Yours
$300.00
AUTOMATION DIRECT
IRONHORSE
WG-262-015-R
IRONHORSE HEAVY-DUTY WORM GEARBOX, 15:1 RATIO, NEMA 56C INPUT, RIGHT HAND, 1.125IN DIAMETER OUTPUT SHAFT, NOMINAL 3.22HP AT 1.0 SF, 1577 LB-IN MECHANICAL OUTPUT TORQUE, 2-5/8IN CENTER DISTAN ...
Repair Yours
$318.00
AUTOMATION DIRECT
IRONHORSE
WG-262-040-R
IRONHORSE HEAVY-DUTY WORM GEARBOX, 40:1 RATIO, NEMA 56C INPUT, RIGHT HAND, 1.125IN DIAMETER OUTPUT SHAFT, NOMINAL 1.85HP AT 1.0 SF, 1919 LB-IN MECHANICAL OUTPUT TORQUE, 2-5/8IN CENTER DISTAN ...
Repair Yours
$318.00
AUTOMATION DIRECT
IRONHORSE
WG-206-020-R
IRONHORSE HEAVY-DUTY WORM GEARBOX, 20:1 RATIO, NEMA 56C INPUT, RIGHT HAND, 1IN DIAMETER OUTPUT SHAFT, NOMINAL 1.57HP AT 1.0 SF, 914 LB-IN MECHANICAL OUTPUT TORQUE, 2-1/16IN CENTER DISTANCE, ...
Repair Yours
$300.00
AUTOMATION DIRECT
IRONHORSE
WG-206-060-R
IRONHORSE HEAVY-DUTY WORM GEARBOX, 60:1 RATIO, NEMA 56C INPUT, RIGHT HAND, 1IN DIAMETER OUTPUT SHAFT, NOMINAL 0.6HP AT 1.0 SF, 750 LB-IN MECHANICAL OUTPUT TORQUE, 2-1/16IN CENTER DISTANCE, C ...
Repair Yours
$300.00
AUTOMATION DIRECT
IRONHORSE
MTPM-P14-1L19
IRONHORSE MTPM DC PERMANENT MAGNET MOTOR, SCR-PWM RATED, 1/7HP, 90 VDC, 1740RPM, TENV, SMALL FRAME, ROLLED STEEL, FLANGE MOUNT.
Repair Yours
$300.00
AUTOMATION DIRECT
IRONHORSE
MTPM-P14-1M18
IRONHORSE MTPM DC PERMANENT MAGNET MOTOR, SCR-PWM RATED, 1/7HP, 180 VDC, 1828RPM, TENV, SMALL FRAME, ROLLED STEEL, FLANGE MOUNT.
Repair Yours
$300.00
AUTOMATION DIRECT
IRONHORSE
MTGR-P14-1L022
IRONHORSE MTGR SERIES RIGHT ANGLE SINGLE SHAFT DC GEAR MOTOR, 1/7HP, 90 VDC, 22RPM, 280 LB-IN FULL LOAD TORQUE, 1.41 FLA, 82:1 RATIO, 5/8IN SHAFT DIAMETER.
Repair Yours
$411.00
AUTOMATION DIRECT
IRONHORSE
GSD7-240-5CR3
IRONHORSE GSD7 SERIES DC REVERSING DRIVE, 240 VAC, 1-PHASE, 1/8 TO 1HP AT 180 VDC, 5.5A, OPEN FRAME, PANEL MOUNT, BUILT-IN REVERSE, MAXIMUM 3 REVERSES/MINUTE, POTENTIOMETER INPUT, SCR OUTPUT ...
Repair Yours
$300.00
AUTOMATION DIRECT
IRONHORSE
GSD5-240-10N4-R
IRONHORSE GSD5 SERIES DC GENERAL PURPOSE DRIVE, 120/240 VAC, 1-PHASE, 1/8 TO 1HP AT 90 VDC AND 1/4 TO 2HP AT 180 VDC, 10.8A, NEMA 4/12, WALL MOUNT, BUILT-IN REVERSE, POTENTIOMETER INPUT, SCR ...
Repair Yours
$334.00
AUTOMATION DIRECT
IRONHORSE
WGA-30M-060-H1
IRONHORSE MEDIUM-DUTY WORM GEARBOX, 60:1 RATIO, NEMA 56C INPUT, HOLLOW, 0.625IN DIAMETER OUTPUT SHAFT, NOMINAL 0.12HP AT 1.0 SF, 134 LB-IN MECHANICAL OUTPUT TORQUE, 30MM CENTER DISTANCE, CAS ...
Repair Yours
$300.00
