Product Search

(PRICE/EACH), 3M MOTOR LEAD PIGTAIL SPLICE 5321, 5-8 KV, SHIELDED AND NON-SHIELDED, 8-4 AWG (FEEDER), 10-4 AWG (MOTOR LEAD), 1 PER CASE

DISCONTINUED BY MANUFACTURER, STEPPER MOTOR DRIVE, 1-PHASE, 120 VAC, 50/60 HZ, 170 VDC, 6.3 ADC MAX, MAX APPLICABLE MOTOR : 700 W

RESOLVER TRANSDUCER, SINGLE TURN, 5/8" KEYWAY SHAFT, INDUSTRIAL, IP67

DISCONTINUED BY MANUFACTURER, ADAPTER PLATE, FOR MOTOR STARTER, INSTALLATION ON 35 MM DIN RAIL

DISCONTINUED BY MANUFACTURER 2019-09-30, MOUNTING BASE, 70 MM, STACK LIGHTS, 855 CONTROL TOWER STACK LIGHTS, 30 MM, 50 MM, 70 MM PUSH BUTTONS & SIGNALING DEVICES 70 MM STACK LIGHTS,BLACK,40 ...

DISCONTINUED BY MANUFACTURER 2010-06-28, SERVO MOTOR, INVERTER DUTY, 1.85 AMP, 0.14KW, 5000 RPM

DISCONTINUED BY MANUFACTURER, SERVO MOTOR, FDGRADE, 6.55 NM, 5000 RPM

STEPPER MOTOR, TWO-PHASED, 1.2A, 4V

MOTOR 0.55KW 420/242VAC 1.4/2.45A 2880RPM

42479 - OTC-2-BK OTB SEAL KIT

GEARMOTOR AC 1/20HP 12RPM 230V 139/1 RATIO

GEARMOTOR, PARALLEL SHAFT, 208 RPM, 12 LB/IN TORQUE, 1/17 HP, 130 VDC, 12:1 RATIO

DISCONTINUED BY MANUFACTURER, GEARMOTOR, PARALLEL SHAFT, 0.167 HP, 28 RPM, TORQUE: 270 LB-IN, SINGLE-PHASE, 115 VAC, 60:1 RATIO

GEARMOTOR, 115VAC, 1/300HP, PARALLEL SHAFT, SPEED 130RPM, 12:1 GEAR RATIO, 24OZ-IN TORQUE, SINGLE PHASE, FACE MOUNT

DISCONTINUED BY MANUFACTURER, GEAR MOTOR, 130VDC, 1/4HP, PARLLSHFT, 62RPM, 40:1, 180LB

DISCONTINUED BY MANUFACTURER, GEAR MOTOR, REPLACED BY 5046, 1/4HP, 130VDC/1.8AMP, 42RPM, 270LB-IN, 60:1RATIO, (42D5BEPM-E3)

GEAR MOTOR .50/.44AMP 115V60/72RPM

GEARMOTOR, PARALLEL SHAFT, 83 RPM, 29 LB/IN TORQUE, 1/17 HP, 130 VDC, 31:1 RATIO

BRUSH, N1 F83 .18 X .24 X.68, 24A PMDC GEARMOTORS AND MOTORS

BRUSH - CARBON GRAPHITE, THICKNESS: 1/4", WIDTH: 3/8", LENGTH: 13/16", AKA:S49200047

MOTOR BRUSH, REPLACEMENT BRUSHES, MATERIAL GRAPHITE G, PGT CL ASSEMBLY F-83, THICKNESS 0.250 INCHES, WIDTH 0.375 INCHES, LENGTH 1.000 INCH, TERMINAL U-0.147 INCHES

BRUSH CAP FOR 4135ZZEH0031 BLACK

DISCONTINUED BY MANUFACTURER, GEAR MOTOR, 33 AMP, 115 VAC, 1/50 HP, 58 RPM

GEAR MOTOR, 115 VAC, 60 HZ, 3 W, 1/8 HP, 170 RPM, 10:1 RATIO 31INLB

DISCONTINUED BY MANUFACTURER, GEARMOTOR, INVERTER DUTY, TEFC, IP20, CLASS F, FRAME 42R, PARALLEL SHAFT, 10:1 RATIO, 3/8 HP, 170 RPM, 1.9 AMP, 3 PHASE, 460 VAC, FACE MOUNT, 42R6BFPP-F2, THIS ...

GEAR MOTOR, 1/450HP, 52RPM, 30:1RATIO, 115VAC, 34OZ-IN

GEARMOTOR, 1/2000 HP, 3.0 RPM, 600:1, 88 OZ-IN., 115 VAC, CAPACITOR START (494 00045), PERMANENT SPLIT CAPACITOR, SYNCHRONOUS.

IP44 PROTECTION KIT FOR 32A/D AND 42A/D MOTORS

ADAPTER PLATE FOR MOTOR

GEAR MOTOR, 130 VDC, 1/16 HP, 83 RPM, 0.53 AMP, 29 LBIN, 30:1RATIO

MOTOR, CONTINUOUS, 55/50 OZ-IN, 300 OHM, 60/72 RPM, .16/.15 AMP, 50/60 HZ, 115 V

GEARMOTOR, RIGHT ANGLE, MODEL 24A4BEPM-3F, 5:1 RATIO, 1/17 HP, 500 RPM, 130 VDC, 0.48 AMP, 5.2 LB-IN

MOTOR, 130VDC, 1/8HP, PERMANENT MAGNET, 2500RPM, 50INOZ

DISCONTINUED BY MANUFACTURER, MOTOR, 1.8 AMP, 130 VDC, 2500 RPM, 1/4 HP

ACTUATOR MOTOR

14" 70TEETH 3/8"WIDE GEARBELT

33" 66TEETH 1.5"WIDE GEARBELT

C96, GRIP V BELTS 102"

CS 10K, FS FZ RS CS COUPLINGS

TAC BRUSH

DISCONTINUED BY MANUFACTURER, SHUNT MOTOR, 5RPM, 0.2AMP, 115VDC, 7INLB

SERVO MOTOR, MEDIUM INERTIA SERIES, 92MM FRAME, 3 MAGNET LENGTH, H WINDING, 1000 PPR ENCODER, NORMAL SHAFT, MILITARY STYLE, NONE

MOTOR BREAK 1.7AMP 3PH 240VAC 5000RPM .4KW

MOTOR REVERSIBLE SYNCHRONOUS GEARED 220VAC 60HZ

COIL, 220/240VAC, 50/60CY , SCREW TERMINAL

DISCONTINUED BY MANUFACTURER, DS CHARGE MOTOR, 120 VAC/125 VDC, 3.5 AMP, 500 RPM, (50960-G4)

COIL D26 RELAY 600V 60CY

MANUAL MOTOR SWITCH, 30AMP, 120-600 VAC, 2-5 H.P., 2 POLE, NORMALLY OPEN, SINGLE PHASE

EATON CORPORATION / CUTLER HAMMER , A307-CN , A307CN , MOTOR PROTECTOR, MANUAL, 25AMP

DISCONTINUED BY MANUFACTURER, 20 A, MANUAL MOTOR STARTER/PROTECTOR, ON/OFF ROTARY HANDLE, LOCKOUT PROVISION, CLASS 10 OVERLOAD PROTECTION