Product Search

DISCONTINUED BY MANUFACTURER, POWER SUPPLY MODULE, AUTOMAX, 115 VAC INPUT/OUTPUT, OUTPUT TO FAN

DISCONTINUED BY MANUFACTURER, PROCESSOR MODULE, PMI, RELIANCE ,O-60021-4

DISCONTINUED BY MANUFACTURER, MODULE I/O, 14BIT RESISTOR, AUTOMAX

DISCONTINUED BY MANUFACTURER, AC VOLTAGE INPUT MODULE, DUAL, 115 VAC/DC

DISCONTINUED BY MANUFACTURER, COMMUNICATION MODULE, 2 INPUT OPTIONS, 9 PIN FEMALE, DCS PASSIVE TAP

DISCONTINUED BY MANUFACTURER, OUTPUT MODULE, AUTOMAX, 5-24VDC, 32 CHANNELS, 0.75 AMP/CHANNEL, 57420, 0-57420

DISCONTINUED BY MANUFACTURER, PROCESSOR MODULE, AUTOMAX, 7010, 25 MHZ CPU SPEED, 512K PARITY RAM, 57435-1, 0-57435-1

MOTOR, SCR SERIES, FRACTIONAL PERMANENT MAGNET, W/BASE, 1750 RPM, 2.5 AMP, 90V, 1/4 HP

DISCONTINUED BY MANUFACTURER,SERVO DRIVE, 5AMP, 230VAC, 50/60HZ, 1PH

ANALOG CTRL BD.

DISCONTINUED BY MANUFACTURER 07/30/2010, POSITIONING DRIVE, 30AMP 1PHASE, 120/240VAC 50/60HZ, PEAK OUTPUT CURRENT/PHASE: 30A CONTINUOUS OUTPUT CURRENT/PHASE: 15A,CONTINUOUS OUTPUT POWER: 3 KW; INTERNAL SHUNT DISSIPATION: 50W

DISCONTINUED BY MANUFACTURER, SERVO MOTOR, SIZE 34 NEMA FRAME, 12 LB-IN TORQUE, 230 VAC, 2000 ENCODER LINE COUNT, 24 VDC BRAKE, STANDARD FLANGE

DISCONTINUED BY MANUFACTURER, SERVO MOTOR, 1.35 NM, 4500 RPM, 230 VAC, SAME AS: 193521, 5422-22-802

SERVO MOTOR, AC, 460 VAC, 75 MM FRAME, 2.1 AMPS, 0.9 KW, 6500 RPM, 2 NM, 18 LB-IN

DISCONTINUED BY MANUFACTURER, SERVO MOTOR, AC 460V, RATED TORGUE 3.2NM, RATED SPEED 5000RPM

DISCONTINUED BY MANUFACTURER, BRUSH SERVO DRIVE, 20-85 VAC INPUT, 24 VDC AUX INPUT

DISCONTINUED BY MANUFACTURER 2013-02-27, DISCONNECT SWITCH, IEC DISCONNECT, UL CLASS CC / J AND CSA HRCI-J FUSED, 200AMP, OPEN STYLE

DISCONTINUED BY MANUFACTURER, SERVO DRIVE, ULTRA 100, 1.5HP, 1KW, 15AMP, 1PHASE, 100-240VAC, 50/60HZ, ELECTRO-CRAFT, RELIANCE ELECTRIC

DISCONTINUED BY MANUFACTURER (06-29-2015), SERVO MOTOR, Y-SERIES, BRUSHLESS, LIGHT INDUSTRIAL, NO BRAKE, 0.17 NM CONTINUOUS TORQUE, 0.48 NM PEAK TORQUE, 0.069 KW MOTOR RATED OUTPUT, 4500 RPM RATED SPEED, 230 VAC, 3 PHASE, 50 WATT, W/ENCODER

DISCONTINUED BY MANUFACTURER, RELAY BOARD, INTERFACE CARD, SCREW TERMINALS

OPERATOR KEYPAD CONTROL MODULE, FOR ACS350/550, W/REAL TIME CLOCK, START-UP ASSIST, PANEL ADAPTER

DRIVE CONNECTOR KIT, POWERFLEX, RJ45 TERMINAL BLOCK, 2 POSITION, (2) 120 OHM TERMINATING RESISTORS, ** 6 PIECE SET **, SOLD AS COMPLETE KIT

LVDT ASSEMBLY 96INCH CABLE

DEVICENET ADAPTER, USES A LINEAR BUS TOPOLOGY, TERMINATING RESISTORS ARE REQUIRED ON EACHEND OF THE TRUNK LINE

ACCURAY PC BOARD FDI

PISTOL DISCONNECT HANDLE, 12X125MM, BLACK

ASEA BROWN BOVERI, 490212, CONTROL BOARD

PROCESSOR PMI CARD

FUSE, 1200 AMP, 600V ,CL L TIME DELAY

AC DRIVE, TYPE ACS150 FREQUENCY CONVERTER, FRAME SIZE R0, 3 PHASE, 200-240 VAC INPUT, 50/60 HZ, 4.3 AMP, 0-500 HZ OUTPUT, 2.4 AMP, 0.37 KW / 0.5 HP

MODBUS ADAPTER MODULE, FOR ACS550 AND ACS800 SERIES INVERTERS, (64606778)

ANALOG I/O EXTENSION, OFFERS TWO UNIPOLAR CURRENT (0[4]20 MA), OR BIPOLAR VOLTAGE (0[2]10 V OR 02 V) INPUTS, AND TWO UNIPOLAR CURRENT (0[4]-20 MA) OUTPUTS, ANALOG UNIPOLAR INPUTS - 12 BIT RESOLUTION, BIPOLAR INPUTS - 11 BIT RESOLUTION

DIGITAL I/O EXTENSION, THREE DIGITAL INPUTS, 250 VDC, 230 VAC, TWO RELAY OUTPUTS 1250 VA

DISCONTINUED BY MANUFACTURER, DRIVECONFIG KIT (USB), THE DRIVECONFIG KIT IS A PC TOOL FOR VOLUME CONFIGURATION AND CONTROL OF ACS55 DRIVES, THE KIT ENABLES PARAMETER SETTING AND PROGRAM UPDATING

AC DRIVE, TYPE ACS150 FREQUENCY CONVERTER, FRAME SIZE R1, 3 PHASE, 380-480 VAC INPUT, 50/60 HZ, 4.1 AMP, 0-500 HZ OUTPUT, 2.4 AMP, 0.75 KW / 1 HP

BASIC CONTROL PANEL, KEYPAD MODULE, NUMERIC LCD DISPLAY, COPY FUNCTION, FOR ACS310 / 320 / 350 / 355 / 550 INVERTER DRIVES, 'J404' OPTION, (ID NO. 64739000)

ETHERNET ADAPTER FOR ABB ACS355 DRIVES, ETHERNET/IP, MODBUS TCP, AND PROFINET.

MODBUS RTU PCB COATED PRINTED CIRCUIT BOARD (PCB) WITH THE RS-485 GND AS THE SAME POTENTIAL AS THE DRIVE I/O GND.

SPEED POTENTIOMETER, 2SWITCH, RUN/STOP AND FORWARD/REVERSE, POLARITY DIP SWITCH

NEMA 1 ENCLOSURE KIT

CONTACTOR, DC DRIVE, 5 DP SERIES, 2 NO / 1 NC, 75 AMP, 3 POLE, 500 VDC, 120 VAC COIL

ROTARY INCREMENTAL ENCODER, H20 SERIES, 3/8" SHAFT DIAMETER, SERVO MOUNT, BI-DIRECTIONAL W/ INDEX,24 VDC, 1024 PPR, NO FACE MOUNT, 7 PIN CONNECTOR, END MOUNT, RELIANCE PART, #607980-71C

DRIVE, VARIABLE FREQUENCY, .25 HP, ACS55 MICRO SERIES, NEMA 1, ENCLOSED, INPUT / SINGLE PHASE / 208-240 VAC, OUTPUT / 1.4 AMP / 3 PHASE / 240 VAC, WITH BUILT-IN EMC FILTER

DRIVE, 110-120V, 50-60HZ, 9.5AMP, MOTOR .37KW 1/2HP, A FRAME SIZE, WITH FILTER

FREQUENCY CONVERTER, ACS55 SERIES, INPUT VOLTAGE = 200 - 240V, 1-PHASE / OUTPUT = 230V, 3-PHASE (DRIVE WITH BUILT-IN EMC FILTER), 50/60 HZ, 2.2A, 0.37KW, IP20, WALL MOUNTED

COMMUNICATION CARD, 10MBD, PLUG-IN MODULE, FAST OPTICAL DDCS COMMUNICATION MODULE, (3ADT220134R0001)

DISCONTINUED BY MANUFACTURER, I/O MODULE, DIGITAL, 230 VAC, INCLUDES IOB-23 MODULE AND ONE RIBBON CABLE

ANALOG I/O MODULE, 2 CABLE, 5 INPUT, 3 OUTPUT

CONTROL PANEL MOUNTING KIT, FOR ACS355 DRIVES, 3METER CAT 5 PATCH CABLE, GASKET FOR NEMA 12, MOUNTING HARDWARE AND DRILLING TEMPLATE

DISCONTINUED BY MANUFACTURER, DC DRIVE, DCS800 SERIES, 3-PHASE CONVERTER, NON-REVERSING (2-Q), 125 KVA, 230-525 V AC, 50/60 HZ